FREE ECONOMY SHIPPING FOR ORDERS OVER $99 WITH COUPON CODE FS99 *exclusions apply

67 DISCONTINUED/IRREGULAR/OVERSTOCK SHIRTS, PANTS, COVERALLS, SHOP COATS, PAINT ROOM,ETC. Available at HUGE discounts-over 70% off list price

$10.99 ECONOMY FLAT RATE FOR ORDERS UNDER $99 *exclusions apply

PRICE DROP!

TEAM JACKETS 

***save $15.00 each on select sizes***

WORK SHIRTS

***save $5.00 each on all available sizes***

YELLOW, ORANGE (LONG & SHORT SLEEVE 65% POLYESTER/35% COTTON)

LIGHT BLUE (SHORT SLEEVE COTTON

STRIPED SHIRTS (LONG & SHORT SLEEVE)

WORK SHORTS

***save $5.00 each on all available sizes***

SPRUCE GREEN & CHARCOAL GRAY


You have no items in your shopping cart.
Call Your Uniform Source 800-621-3344

7:30am - 4:00pm CST Monday - Friday

Menu
Picture of Westex Indura® 9.5 oz Navy Blue Coverall-Heavy Weight
Picture of Westex Indura® 9.5 oz Navy Blue Coverall-Heavy Weight Picture of Westex Indura® 9.5 oz Navy Blue Coverall-Heavy Weight

Westex Indura® 9.5 oz Navy Blue Coverall-Heavy Weight

MORE INFORMATION ABOUT INDURA® Fabric: Westex 100% cotton, ammonia cured flame-resistant twill is self-extinguishing when removed from a flame or heat source. Applications: Multi-purpose protection from electric arc, flash fire, molten ferrous metal and welding exposures. Not intended for use against chemical exposures or near molten aluminum, magnesium, zinc, or in high static control situations. Protection level: Secondary protective clothing where intermittent exposure to molten substance splash, radiant heat, and flame is possible. ATPV of 7.7 cal/cm². Garment life: For 36-50 washings. Flame resistance is for the life of the garment. Processing: DO NOT WASH WITH CHLORINE BLEACH, STARCHES, SOFTENERS, AND OTHER ADDITIVES, as this will wash out the flame-resistant finish.
Manufacturer: Universal Overall Company
Be the first to review this product
*
*

Need Embroidery?

All embroidery is done on our in-house Texmac commercial-strength embroidery machine with four heads and space for fifteen colors. Because all embroidery is done in-house, it allows for faster turn-around time and competitive pricing. The commercial-strength embroidery machine guarantees the highest quality embroidery with tight stitches that lasts for hundreds of wearings and washings.

Location 1

View Examples

Left Chest (as wearing) - typically if there is only a name
Right Chest (as wearing) - typically for 2 locations, name on right, company name on left
Other - please note in special instructions (additional charges may apply)

View Examples
View Examples

Please note that the selected font and size will determine the number of letters available.

BLOCK ALL CAPS 

3/8 inch high letters (up to 22 letters)
7/16 inch high letters (up to 17 letters)
1/2 inch high letters (up to 15 letters)
5/8 inch high letters (up to 13 letters)            
3/4 inch high letters (up to 10 letters)
1 inch high letters (up to 8 letters)

Block (1st letter upper case-rest lower case)

3/8 inch high first letter (up to 22 letters)
7/16 inch high first letter (up to 18 letters)
1/2 inch high first letter (up to 16 letters)
5/8 inch high first letter (up to 14 letters)
3/4 inch high first letter (up to 11 letters)
1 inch high first letter (up to 8 letters)

Script (1st letter upper case-rest lower case)

3/8 inch high first letter (up to 28 letters)
7/16 inch high first letter (up to 23 letters)
1/2 inch high first letter (up to 18 letters)
5/8 inch high first letter (up to 15 letters)
3/4 inch high first letter (up to 11 letters)
1 inch high first letter (up to 7 letters)

Please click on the color you want.

Please type as you want the name to appear: I.e. Bob OR I.e. BOB

Location 2

View Examples

Left Chest (as wearing) - typically if there is only a name
Right Chest (as wearing) - typically for 2 locations, name on right, company name on left
Other - please note in special instructions (additional charges may apply)

View Examples
View Examples

Please note that the selected font and size will determine the number of letters available.

BLOCK ALL CAPS 

3/8 inch high letters (up to 22 letters)
7/16 inch high letters (up to 17 letters)
1/2 inch high letters (up to 15 letters)
5/8 inch high letters (up to 13 letters)            
3/4 inch high letters (up to 10 letters)
1 inch high letters (up to 8 letters)

Block (1st letter upper case-rest lower case)

3/8 inch high first letter (up to 22 letters)
7/16 inch high first letter (up to 18 letters)
1/2 inch high first letter (up to 16 letters)
5/8 inch high first letter (up to 14 letters)
3/4 inch high first letter (up to 11 letters)
1 inch high first letter (up to 8 letters)

Script (1st letter upper case-rest lower case)

3/8 inch high first letter (up to 28 letters)
7/16 inch high first letter (up to 23 letters)
1/2 inch high first letter (up to 18 letters)
5/8 inch high first letter (up to 15 letters)
3/4 inch high first letter (up to 11 letters)
1 inch high first letter (up to 7 letters)

Please click on the color you want.

Please type as you want the name to appear: I.e. Bob OR I.e. BOB

Old price: $98.75
$29.95

317-7N

EMBROIDERED LOGOS ARE ALSO AVAILABLE. The ordering procedure is as follows:
1. Send an email to email@youruniformsource.com with an image of the logo, the dimensions of the logo, the color of the thread to be used (list any color, even if it is not included as a text/thread color, up to fifteen colors), the number of garments that will need the logo, and the location of the logo (commonly above the left or right pocket or on the back of the garment) You may also call 1-800-621-3344 with any questions.
2. There is a one-time fee to digitize the logo into a dst format (this fee will be waived if the logo is already in a dst format). We will take care of that for you after the image is received via email.
3. You will receive an email with the cost to embroider the garment(s) before or after the logo is digitized. Most of the time it is before but sometimes it is after if the logo embroidery is especially complicated, meaning there are an exceptionally large number of stitches. Pricing is based on the number of stitches.
4. You will receive a sew-off sample via email approximately 5-10 working days after the logo has been emailed to us.
5. Once the sew off sample has been approved, please allow 5-10 working days (depending on the size of the order) to be sent to you.

View Examples
PRICE BREAKS - The more you buy, the more you save
Quantity2+3+
Price$21.80$20.95
Products specifications
Attribute nameAttribute value
Fabric9.5 oz. twill
Blend100% cotton
FinishWestex Indura® flame resistant, , an excellent balance of protection, value, and comfort
Protection LevelCAT 2
Arc RatingATPV 10.8 calories/cm2
PocketTwo front slash swing pockets, two hip patch pockets, ruler pocket
WaistbandBanded
CollarTopstitched
BackPlain back
Side OpeningsYes
CuffConcealed snap cuff with vent
ClosureConcealed snap closure with one exposed snap at neck
SIZING NOTELongs are 1 inch longer than regulars in the legs and 2 inches longer than regulars in the body and sleeves
FLAME RESISTANT NOTESAll flame resistant material and garments DO NOT OFFER THE SAME LEVEL OF PROTECTION. Flame resistant clothing does not insulate against chemical exposure. The end-user is responsible to conduct an analysis of hazards present in the workplace to select appropriate engineering controls, protective equipment, and garments to address those hazards. Flame resistant clothing requires special handling in the repair and maintenance of garments and may require special handling during the cleaning/laundry process. Please contact our customer service department for more specific information about the properties, care instructions, and guarantees by the FR fabric manufacturer.
Customers who bought this item also bought
Picture of Charcoal/Dark Gray Industrial Pant (DISCONTINUTED STYLE)

Charcoal/Dark Gray Industrial Pant (DISCONTINUTED STYLE)

Available in 9 waist sizes and hemmed 35 inches or shorter
CLOSEOUT PRICING-WHEN THEY'RE GONE, THEY'RE GONE.
FINAL SALE-NO RETURNS OR EXCHANGES
Because this item is heavily discounted, unless otherwise indicated, discount coupons, flat rate shipping, and free shipping do not apply to this item.
Manufacturer: Universal Overall Company
Starting At From $9.95
Picture of Westex UltraSoft® Button Front Work Shirt

Westex UltraSoft® Button Front Work Shirt

Available in 2 colors and 18 sizes
VOLUME DISCOUNT AVAILABLE FOR 25 OR MORE PIECES
Manufacturer: Universal Overall Company
$92.50 Starting At $73.00
Picture of Perma-Lined Panel Jacket (longer body length)

Perma-Lined Panel Jacket (longer body length)

Available in 2 colors and 16 sizes
VOLUME DISCOUNT AVAILABLE FOR 30 OR MORE PIECES
Manufacturer: Universal Overall Company
$48.85 Starting At $44.49
Picture of Westex Indura® Visual Green Coverall-MADE IN THE USA-BIG & TALL

Westex Indura® Visual Green Coverall-MADE IN THE USA-BIG & TALL

Available in 8 sizes
MORE INFORMATION ABOUT INDURA® Fabric: Westex 100% cotton, ammonia cured flame-resistant twill is self-extinguishing when removed from a flame or heat source. Applications: Multi-purpose protection from electric arc, flash fire, molten ferrous metal and welding exposures. Not intended for use against chemical exposures or near molten aluminum, magnesium, zinc, or in high static control situations. Protection level: Secondary protective clothing where intermittent exposure to molten substance splash, radiant heat, and flame is possible. ATPV of 7.7 cal/cm². Garment life: For 36-50 washings. Flame resistance is for the life of the garment. Processing: DO NOT WASH WITH CHLORINE BLEACH, STARCHES, SOFTENERS, AND OTHER ADDITIVES, as this will wash out the flame-resistant finish.
Manufacturer: Universal Overall Company
$98.75 Starting At $29.95
Picture of Proban®FR-7A® Visual Green Coverall (two chest pockets with flaps) -MADE IN THE USA-BIG AND TALL

Proban®FR-7A® Visual Green Coverall (two chest pockets with flaps) -MADE IN THE USA-BIG AND TALL

Available in 3 sizes
MORE INFORMATION ABOUT PROBAN®FR-7A® Fabric: Westex 100% cotton flame-resistant twill 9 oz. Sateen, ammonia cured is self-extinguishing when removed from a flame or heat source. Applications: Foundry and welding. NOT INTENDED FOR USE AGAINST CHEMICAL EXPOSURES NOR NEAR MOLTEN ALUMINUM, MAGNESIUM, ZINC NOR IN HIGH STATIC CONTROL OPERATIONS. Protection level: Secondary protective clothing where intermittent exposure to molten substance splash, radiant heat, and flame is possible. Garment life: 50 washes at a maximum temperature of 140 degrees Fahrenheit or 25 industrial washes at a maximum temperature of 165 degrees Fahrenheit. Processing: DO NOT WASH WITH CHLORINE BLEACH, STARCHES, SOFTENERS, AND OTHER ADDITIVES, as this will wash out the flame-resistant finish.
Manufacturer: Universal Overall Company
$75.50 Starting At $19.95
Picture of Perma-Lined Panel Jacket (Irregular) (longer length)

Perma-Lined Panel Jacket (Irregular) (longer length)

Available in 1 color and 2 sizes
Manufacturer: Universal Overall Company
New with defects : These jackets might have minor stitching, small puncture holes, and fabric flaws such as minor stains or off shade. There are no major fabric or construction flaws. All sizing falls within the correct specifications.
$45.85 Starting At $16.50

HIGH QUALITY APPAREL AND WORK UNIFORMS

Your Durable, Dependable, Affordable Uniform Source
Quick Links
Uniform Categories
Have a Question?

Complete the form below and a representative will get back to you shortly or feel free to give us a call at 800-621-3344.

Powered by nopCommerce
 | Developed by VisionFriendly.com
Copyright © 2023 Your Uniform Source. All rights reserved.